Optional Log Set
The R820* has the option of installing a drift wood log set� Once the stones have been installed the log set can be installed�
Ensure logs are securely placed and will not tip or fall� Remove stones where logs touch the burner tray to ensure a more secure
position�
Lean the logs against the back panels. NO LOGS SHOULD LAY ACROSS OR OVER TOP OF THE BURNER PORTS ON THE
SURFACE OF THE BURNER.
R820 Log Kit Installation
Log kits used to create sequence shown: 1 LGS57, 3 LGS58
LGS57
Step 1: Remove both logs in kit LGS57� Both logs are identical�
Place each log in the location shown in figure 23a . Use the
panel joints as reference� The logs should be behind the burner
ports and leaning against the panel�
The log placed on the right should be orientated in the same
direction to the left log�
Step 2: Identify logs in kit LGS58
LGS58
1
2
2
2
3
3
4
5
6
Place Log 2 behind the burner port next to the right log of
LGS57. See figure 23d.
Step 3: Place log 3 from the LGS58 kit to the right of the port,
resting on log 2, see figure 23e.
R720 & R820 Power Vent Indoor Gas Fireplace
Page 32
XG0772 - 150105�4
Installation
Figure 23b
Figure 23d
Figure 23e
Figure 23a
Figure 23c
