background image

31

Appendix

XG0799 - 081319

MONTIGO COMMERCIAL WARRANTY PROGRAM

Canadian Heating Products Inc. and/or Montigo DelRay Corp 

(collectively referred to herein as "The Companies"), warrants the 

Montigo gas appliance (referred to herein as 'the appliance') to 

be free from defects in materials and workmanship at the time 

of manufacture. The gas appliance and related components are 

further subject to the terms and conditions set forth below.

This warranty covers the following Montigo product series: 

Prodigy, BF, C-View

Component

Coverage Period

Labor Coverage

Firebox, heat exchanger

10 years

1 year

Main burner

10 years

1 year

Gas control valve and related control components 

(pilot assembly, spark electrode flame sensors, 

thermopile)

1 year

1 year

Electrical components (internal blowers, ignition 
control module, wiring, switches, remote control 
systems, blower control module, accent bulbs)

1 year

1 year

Firebox media (logset, glass beads, river rocks)

1 year

None

Glass panes

None

None

Plated, painted finishes (including interior reflective 

glass)*

1 year

1 year

Refractory lining

1 year

1 year

Power vent control box

1 year

1 year

Power vent termination

1 years

1 year

* Exterior painted surfaces exempt 

QUALIFICATIONS TO THE WARRANTY

This Warranty only covers gas appliances installed in the United 

States or Canada.

To receive the benefits of this warranty, the appliance must 

be purchased, installed and serviced annually by a dealer 

authorized by the Companies for the warranty to be valid.

The gas appliance must be installed by a licensed professional 

in accordance with The Companies installation instructions 

and local building codes. The warranty on the appliance covers 

only components manufactured by The Companies. The use of 

components manufactured or supplied by other manufacturers 

and used in conjunction with the appliance could create serious 

safety hazards, may result in the denial of certification by 

recognized national safety agencies and could violate local 

building codes. Such use may untimely void this warranty. This 

warranty does not cover any damages occurring from the 

use of any components not manufactured or supplied by The 

Companies.

The appliance must be subjected to normal use. The appliance 

is designed to burn natural gas (NG) or liquefied petroleum (LP) 

only. Burning conventional fireplace fuels such as wood, coal or 

any other solid fuel will cause damage to the appliance, produce 

excessive temperatures will result in a fire hazard and void all 

warranties. This warranty is transferable. The appliance must 

remain in its original place of installation to be valid.

If the components of the appliance covered by this warranty 

are found to be defective within the time frame stated (see The 

Companies investigation of claims), The Companies will, at its 

option, replace or repair defective components of the appliance 

manufactured by The Companies at no charge and will also 

pay for labor costs (in accordance with schedule) incurred in 

replacing or repairing components. If repair or replacement 

is not commercially practical, The Companies will, at its sole 

discretion, fully discharge all obligations under the warranty by 

refunding the verified dealer purchase price of the appliance, 

excluding the cost of labor unless the labor is covered by the 

terms of the warranty.

This warranty covers only parts and labor as provided above. 

In no case shall The Companies be responsible for materials, 

components or construction, which are not manufactured or 

supplied by The Companies, or for the labor necessary to install, 

repair or remove such materials, components or construction. All 

replacement or repair components will be shipped F.O.B. from 

the nearest Company factory. 

LIMITATION ON LIABILITY

It is agreed and understood that The Companies sole obligation, 

and purchaser's exclusive remedy under this warranty, under 

any other warranty, expressed or implied, or in contract, tort 

or otherwise, shall be limited to shall be limited to repair, 

replacement or refund as specified above. The opinion of The 

Companies with respect to these matters shall be final.
In no event shall The Companies be responsible for any 

incidental or consequential damages caused by (but not limited 

to) improper installation, installation by an unqualified or 

unauthorized installer, accident, lack of regular maintenance, 

user error, abuse, misuse, Acts of God, power surges, floods, 

natural disasters, force majeure, defects in its appliance whether 

such damage occurs or is discovered before or after replacement 

or repair, and whether or not such damage is caused by The 

Companies negligence. Some jurisdictions do not allow the 

exclusion or limitation of incidental or consequential damages, 

so the above limitation or exclusion may not apply to you. The 

duration of any implied warranty with respect to the appliance 

is limited to the duration of the foregoing warranty. Some 

jurisdictions do not allow limitations on how long an implied 

warranty lasts, so the above limitation or exclusion may not 

apply to you.

Appendix B: Warranty

Содержание Prodigy PC3 Series





































Отзывы: