Installation
Installation
Page 3
XT0015 - 150324
6. Using the supplied cable ties and self-adhesive cable tie mounts,
secure the fan harness to the bottom of the firebox. Make sure to
keep the wires away from fan blades and door buckles.
7. Reinstall the burner tray (if removed). See
for
examples
8. Complete the installation as per the fireplace installation manual.
Program the remote transmitter to the control box as per the
supplied
"Proflame2 Operation and Maintenance Manual-
XG0677"
and start-up your fireplace. Turn the fans on using the
remote control.
9. Use the remote control to adjust the fan speed to the desired set
-
ting.
The fans only operate when the unit is running. You may
turn the fans off completely using the remote control.
Figure 7
Wiring for the optional Fan Kit
The following fireplaces may be equipped with optional fan kits:
H*42DF*
,
H*34DF*
,
H*38DF*
,
L*42DF*
,
L*38DF*
,
L*52DF*
.
Installations in Canada which employ the fans must be electrically
grounded in accordance with CSA C22.1 Canadian Electrical Code
Part 1 and/or Local Codes.
Installations in the USA which employ the fans must be grounded
in accordance with local codes or, in the absence of local codes, with
the National Electrical Code, ANSI/NFPA 70.
NOTE:
If any of the original wire supplied with the appliance
is replaced, it must be replaced with the same type,
or its equivalent.
Figure 8. Wiring diagram for optional fans.
G
L2-WH
L1-BLK
p g
Quick Connect
lu to motor
5/1/60 Supply
G
L1 L2