Fan Kit
Installing the HFK50R Fan Kit for Proflame 2
Installing the HFK50R Fan Kit for Proflame 2
Page 1
XT0015 - 150324
This kit should be installed by a qualified person.
Check local codes and read all instructions prior to installation.
Ensure that all power to the appliance is off at the electrical breaker or fuse
before beginning installation. Ensure gas is turned off at the shutoff valve before
beginning installation.
CAUTION
For use with:
H*34-DF/DL; L38-DF
H*38-DF/DL; L42-DF
H*-DF/DL; L52-DF
* = C, L, P, R, W
General Information
This blower kit is for installation with the models listed above.
®
C
US
Before You Begin
Ensure that the power supply has been turned off at the breaker or
fuse before beginning the installation.
Shut off the gas supply at the shut-off valve, and ensure that the main
burner and pilot light have been turned off and the fireplace has been
cooled off for at least two hours before installation.
KIT #
Contents
HFK50R
2x blowers, 1x fan cord assembly, 4x mounting screws,
Velcro strips, self-adhesive cable tie mounts and cable
ties.
HFK50R
Required:
This fan kit requires one of the remote control
kits (PF2 Remote Kit or RX 100*) for proper operation.
Figure 1
Contents of HFK50R Fan Kit package.
Left fan
Right fan
Fan wire harness
Cable ties &
mounts
Fan mount-
ing screws
WARNING
When installing the fireplace - gas lines, fittings, accesso-
ries or any other objects cannot impede the proper
movement of the door buckles.
Some materials used in the manufacturing process of this product can
expose you to Benzene which is known in the State of California to
cause cancer and birth defects or other reproductive harm. For more
information go to www.P65warnings.ca.gov
WARNING
