XG0221
43
Installation
Optional Glass Reflective panel Installation
Kit Contents:
•
Side panels
•
Rear Panels
•
Panel retainer clips (qty: 5)
•
5 Black Screws
Kit Contents:
•
Side panels
•
Panel retainer clips (qty: 2)
•
2 Black Screws
Tools Required:
•
Drill / Driver
•
1/4'' hex bit
Tools Required:
•
Drill / Driver
•
1/4'' hex bit
Before you begin:
For See-Through Installation:
For Single Sided Installation:
Always ensure the kit part number is correct for the fireplace model
and all kit contents are included. The model number may be found on
the rating plate under the valve blind of the fireplace.
See through installations receive the following reflective glass kit.
Only follow steps 1, 2 and 5. As the rear panels are not needed for the
see-through unit.
Installation:
Step 1:
Remove the existing screws in the back and side walls of the
fireplace, these holes will be used to hold the panel clips.
Step 2:
Place rubber bumper in the center of the panel channel.
Step 3:
Secure panel in place with provided clip.
x2
x2
x3
Side Panels
Side Panels
Rear Panels
x5
x2
Figure 26. Remove the existing screws
Figure 26.b Place rubber bumper
Figure 26.c Secure panel
