Monti MontiPower BRISTLE BLASTER ELECTRIC DOUBLE, Руководство пользователя

Страница: 8 / 14

EN Operating instructions
4.3 Additional Safety Instructions
WARNING – Always wear protective goggles.
• Accessories must be stored and handled with care in accordance with the
manufacturer's instructions.
• The workpiece must lay flat and be secured against slipping, e.g. using clamps.
Large workpieces must be sufficiently supported.
• We recommend connecting a residual current circuit-breaker (FI) upstream.
When the tool is shut down via the FI circuit-breaker, it must be checked and
cleaned. See chapter 9. Cleaning for more information on cleaning the motor.
• Damaged, eccentric or vibrating tools must not be used.
• Disconnect the tool from the mains power supply before making any
adjustments, converting or servicing the machine.
• A damaged or cracked handle must be replaced. Never operate a machine
with a defective handle.
• A damaged or cracked hand guard must be replaced. Never operate a machine
with a defective Protective Cap.
Reducing dust exposure:
WARNING - Some dust created by the MontiPower
®
Bristle Blasting
®
process may
contain chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
This also applies to dust from other materials such as some timber types (like oak or
beech dust), metals, asbestos. Other known diseases are e.g. allergic reactions, respiratory
diseases. Do not let dust enter the body.
Observe the relevant guidelines and national regulations for your material, staff,
application and place of application (e.g. occupational health and safety regulations,
disposal).
Collect the particles generated at the source, avoid deposits in the surrounding area.
Use suitable accessories for special work. In this way, fewer particles enter the environment
in an uncontrolled manner.
Use a suitable extraction unit.
Reduce dust exposure with the following measures:
• do not direct the escaping particles and the exhaust air stream at yourself or nearby
persons or on dust deposits,
• use an extraction unit and/or air purifiers,
10
BRISTLE BLASTER
®
ELECTRIC DOUBLE