8
9
1
•
888
•
557
•
3848
Wards.com
Installation
(cont’d)
7. Secure Guide Panels:
Fasten the top of the guide panels to the sash with 3 screws (Item B). Use the
remaining 2 screws (Item B) to secure the bottom of the guide panels to the window
sill.
If AC is blocked by storm window frame, fasten a 2
"
wide wood strip to the inner
window sill across the full width of the sill. The wood strip should be thick enough to
raise the height of the window sill so that the unit can be installed without interfer-
ence from the storm window frame (approximately 3/4-inch above storm window
frame).
Install a second wood strip (approximately 6
"
long by 1 1/2
"
wide and the same
thickness as the first wood strip) in the center of the outer sill. Place it flush against
the back of the inner sill.
Insert foam strip (Item E) in the space between the window sill and the bottom of the
air conditioner.
AC Removal
To remove air conditioner, turn power OFF and disconnect power cord. Remove the
5 screws installed in the top and bottom of the guide panels. Close guides and with
a firm grip on the unit tilt outward to allow any condensation to drain out.
CAUTION:
To avoid strain or injury to your back, use proper lifting and carrying
techniques when moving air conditioner.
To Store:
Be sure all parts are clean and dry before storing. Store appliance in original box.
Control Panel:
Error Codes:
If the display on the control panel shows E1 or CF, it’s time to clean the filter.
If the display shows ER, EN or ED, call for service.
10
Wards.com
11
Operating Instructions
1
•
888
•
557
•
3848
High Speed
Indicator Lamp
Medium Speed
Indicator Lamp
Low Speed
Indicator Lamp
Fan Speed
Button
Timer Indicator Lamp
Timer Set
Button
Cool Mode
Indicator Lamp
Fan Mode
Indicator Lamp
Energy Saver
Indicator Lamp
Operation Mode
Button
Temperature Decrease
Button
On / Off
Button
