1
•
888
•
557
•
3848
Wards.com
8
9
Troubleshooting
Problem
Possible Cause
Remedy
The drill does not start.
Battery discharged.
Recharge the battery.
Overload protection shut
down the tool/battery.
Allow motor/battery to cool
down then restart.
Faulty power trigger.
Contact Customer Service.
The drill is slow and/or
shuts off.
Blunt/damaged drill bit.
Replace the drill bit.
Too much pressure applied.
Decrease applied pressure.
Battery discharged.
Recharge the battery.
Overload protection shut
down the tool/battery.
Allow motor/battery to cool
down then restart.
Sparks in the motor.
Motor fault.
Contact Customer Service.
Worklight does not turn on.
Battery discharged.
Recharge the battery.
Parts & Features Worklight
1
3
4
1. Pivot connection
2. Power button
3. Grip handle
4. Battery release button
2
How to Use the Worklight
1. Insert rechargeable battery and push until it clicks in place.
2. Press the power button to turn the worklight on or off.
3. Pivot the worklight head up to 95
°
.
4. To remove the battery, press the battery release button.
Cleaning & Disposal
IMPORTANT:
Remove battery before cleaning.
Clean the power tools using a soft, dry cloth. If necessary, a damp cloth with mild
detergent can be used on the drill. Do NOT use solvents or abrasive cleansing
agents. Remove debris from the ventilation openings in the drill to
maintain proper airflow.
Power tools and batteries should not be disposed of with general
household waste. Follow local regulations for proper disposal.
Specifications
Drill
Keyless Chuck: 1/2
in.
Speed Settings: 2
Torque Settings: 23 + drill
RPM: low 0
–
400; high 0
–
1100
Drill Bits: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4
Screw Bits: PH1, PH2, PH3, SL1/8, 3/16, 1/4
Extension Bar: 2.28 inches
Battery:
18-volt Lithium-ion
Weight:
3.5 lbs. with battery
Worklight
Beam Type: Fixed
Lumens: 110
–
130
LED bulb: 3 W
Beam Angle: 120
°
Aperture: 3 inches
Pivot: 95
°
Battery:
18-volt Lithium-ion
Weight:
1.5 lbs. with battery
