4
1
•
888
•
557
•
3848
Wards.com
4
5
Parts & Features
Polarized Plug
This appliance has a polarized plug (one blade is wider than the other). As a safety
feature to reduce the risk of electrical shock, this plug is intended to fit a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to modify the plug in any
way.
SHORT CORD INSTRUCTIONS
1. A short power supply cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord.
2. Longer detachable power supply cords or extension cords are available and may
be used if care is exercised in their use.
3. If a long detachable power cord or extension cord is used:
• The marked electrical rating of the detachable power supply cord or extension
cord should be at least as great as the electrical rating of the appliance.
• If the appliance is of the grounded type, the extension cord should be the same
type 3-wire.
• The longer cord should be arranged so that it will not drape over the countertop
or tabletop where it can be pulled on by children or tripped over.
MAGNETIC PLUG
This appliance is equipped with an easy breakaway magnetic plug.
PLASTICIZER WARNING
CAUTION: To prevent Plasticizers from migrating from the finish of the countertop or
tabletop or other furniture, place NON-PLASTIC coaster or place mats between the
appliance and the finish of the countertop or tabletop.
Failure to do so may cause
the finish to darken. Permanent blemishes may occur or stains can appear.
Important Safeguards
(cont’d)
Control Panel
Timer
Temperature
Control Knob
Power ON Light
Temperature
Ready Light
17. This appliance has a built-in safety switch. If the control panel is not installed
properly on the housing unit, power will automatically be disengaged.
18. If the fryer is turned ON without oil or without the minimum amount of oil re-
quired, the deep fryer will automatically shut down to prevent the appliance from
overheating.
19. If either of these situations occur, allow the deep fryer to cool completely then
press the reset button on the control panel (see page 6).
