8
Attach each side handle using four (4) M6 x 12 hex bolts and M6 flange nuts.
To assemble the lock, place the lock body in the opening on the front of the utility box.
Thread the M18 hex nut onto the lock body, and tighten until the lock is secured against
the front of the utility box. Slip-joint pliers can help tighten the nut into place.
Place the locking cam onto the lock body and secure with the M5 x 6 screw. Tighten
the screw to secure the lock assembly in place, but not so tight that you cannot turn the
locking cam with the key.
