Montesa COTA 4RT 260 2023, Руководство пользователя

Страница: 61 / 180

Service and maintenance
3-18 3-18
Inspection
1. Check for a broken or collapsed spring.
2. Bounce the rear of the machine up and down and check
for smooth suspension action.
3. Check the rear shock absorber for a bent shaft or oil
leaks.
4. Push the rear wheel sideways to check for worn or
loose swingarm bearings. There should be no move-
ment. If movement is felt, replace the pivot bearings
(page 5-17).
(1) SCREWS
(2) THE HOUSING FOR THE UPPER HEADLIGHT
Front headlight and front and rear position
light.
Replacing the bulbs
y
Bear in mind the following when replacing the front
headlight bulb.
– Use clean gloves when replacing the bulb. Do not
touch the front headlight bulb with your fingertips,
since this could produce hot spots on the bulb and
cause it to break.
– If you touch the bulb with your bare hands, clean it
with a cloth moistened with alcohol to prevent its
early failure.
y
Ensure that you replace the dust cover after changing
the front headlight bulb.
y
The bulb for the front headlight gets very hot when it is
on and remains hot for a while after the front headlight
has been turned off. Ensure that you leave it to cool
before carrying out any maintenance work.
(1) DUST COVER
(2) BULB PAWL
(3) BULB
(4) CONNECTORS
– Remove the housing for the upper headlight.
– Disconnect the connectors.
– Remove the dust cover.
– Unhook the bulb pawl.
– Remove the front headlight bulb .
AVISO
Do not touch the bulb. Fingerprints may create hot spots
that cause the bulb to break.
Fit the bulb, while aligning its tabs with the slots on the
front headlight unit.
Hook the bulb pawl in the slot of the front headlight unit.
Firmly replace the dust cover on the headlight.
Replace the housing for the upper headlight.
3
2
1
1
1
2
1
4