Montesa 4Ride 2017, Инструкции по установке, Страница: 6 / 12

6
• Fix the handlebar in place by tightening the
two handlebar holder mounting screws to the
specified torque.
Torque: 22 N•m (2.2 Kgf•m, 16 lbf•ft)
• Attach the front brake pump to the handlebars.
Remove the bracket, install the assembly in the
handlebar tube.
Mount and tighten the bolts to the specified
torque.
Torque: 3.2 N•m (0.33 Kgf•m, 2.4 lbf•ft)
• Remove the plastic pin that holds the footsteps
vertically.
Grip the footstep and remove the plastic pin
from inside each one.
• Remove the plastic protective wrapping from
the motorbike. Odometer, turn signal lights,
tank, swingarm.