Monterey 305 SS, Руководство пользователя

Страница: 126 / 168

126
MONTEREY
BOATS
Seasonal Maintenance
NOTICE:
If the boat is to be stored indoors or out-
doors, open all drawers, clothes lockers,
cabinets, and doors a little. If possible,
remove the upholstery, mattresses, cloth-
ing, and carpets. Then hang a commercially
available mildew protector in the cabin.
13.3 Recommissioning
WARNING
DO NOT OPERATE THE BOAT UNLESS IT IS COMPLETELY
ASSEMBLED. KEEP ALL FASTENERS TIGHT. KEEP
ADJUSTMENTS ACCORDING TO SPECIFICATIONS.
Notice:
It is important and recommended that the
fitting out procedure for the marine gear be
done by a qualified marine technician. Read
the engine owner’s manual for the recom-
mended procedure.
Reactivating The Boat After Storage:
• If your boat is bottom painted, apply a fresh
coat of bottom paint on the hull and engine.
• Check the engines for damage and follow the
manufacturer’s instructions for recommis-
sioning.
• Check the engine mounting bolts to make sure
they are tight.
• Inspect thru-hull fittings.
• Install the propellers. Refer to the engine
owner’s manual for information on installing
the propellers.
• Install the drain plug in the hull.
• Charge and install the batteries.
• Perform all routine maintenance.
• Check all hose clamps for tightness.
• Check and lubricate the steering system.
• Clean and wash the boat.
• Install all upholstery, cushions and canvas.
• Check the fluid levels in the engines.
After Launching:
• Carefully check the engines and all water sys -
tems for leaks. Operate each system one at a
time checking for leaks and proper operation.
• Check the bilge pump automatic and manual
switches.
• Prime the fuel system and start the engines.
• When each engine starts, check the cooling
system port below the engine cowling for a
strong stream of water. This ensures that the
cooling pump is operating.
• Carefully monitor the gauges and check for
leakage and abnormal noises. Monitor the
temperature gauges closely until they stabilize
at normal operating temperature to ensure
that the cooling pumps are operating properly.
• Operate the boat at slow speeds until the en -
gine temperatures stabilize and all systems
are operating normally.