Monte Carlo Fan Company Dylan 3DYR56 Series, Руководство пользователя и инструкция по установке

Страница: 5 / 9

5
© 2015 Monte Carlo Fan Company
9/15/2015
13 14
15
12
16
Partially loosen 2 of the set screws on
mounting bracket corresponding to the
slotted holes on the canopy upper ring.
Remove the other 2 set screws. Save
screws.
Install blade bracket onto motor with set
screws provided.
Repeat this process for remaining blade
brackets. Tighten all set screws securely
Install a decorative cap onto motor shaft
by turning clockwise until tight.
Install blade, aligning 3 alignment posts
on blade with the holes in blade bracket,
then install it with set screws provided.
Repeat this process for remaining blades.
Tighten all screws securely.
Raise canopy to mounting bracket,
aligning loosened screws in mounting
bracket with slotted holes in canopy.
Twist canopy to lock. Reinstall the screws
removed in step 12 and tighten all
screws securely.
Canopy
Mounting
bracket
Canopy
Decorative cap
Blade bracket
Blade
Alignment post