Monte Carlo Fan Company Drawing Room 5ED56 D-L Series, Руководство пользователя и инструкция по установке

Страница: 4 / 7

© 2011 Monte Carlo Fan Company
6/1/2012
4
Carefully lift fan assembly onto mounting br ack-
et. Rotate fan so that the notch on the ball
engages the ridge in the mounting br acket. This
will allow hands-free wiring.
10
Attach blade assembly to motor
using the motor screws and w ashers
provided. Tighten screws securely.
17
Remove 1 screw and loosen 2
screws.
18
Make wire connections to power source using
wire nuts provided. Make sure that no filiments
are outside of the wirenut. After making the
wire connections, the wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of
the outlet box and ungrounded conductor on
the other side of the outlet bo x.
12
For pullchain controls, follow diagr am above.
Make sure that all exposed wiring is secured
inside wire nuts. Note: Wires from house ma y
vary in color and ma y not include ground wire.
After wiring is conplete, gently push wires into
junction box with wire nuts pointing upw ard.
Refer to point 3 of safet y tips.
13
For control of fan and optional light from w all
location, follow diagram above. NOTE: A profes-
sional electrician is recommended for this t ype
of installation.
14
Light
Switch
Fan Switch
Wall
Control
Attach blade brackets to blades using
the blade bracket screws and wash-
ers provided.
16
Loosen one and remove one preassem-
bled screw from mounting bracket.
Save screw. Lift canopy up, aligning its
keyhole slot with the preassembled
screw on mounting bracket and twist
clockwise to lock in place. Re-install the
removed screw and tighten all screws
securely.
1 5
For Canadian installation and for USA fan and light
kit combinations over 35 lbs, in both flush and
downrod modes the safety cable must be installed
into the house structure beams using 3” lag
screws, washers and lock washers provided. Make
sure that when the safety cable is fully extended
the lead wires are longer than the cable and no
stress is placed on the lead wires.
note :If Installing The Secondary Support Safety
Cable in the U.S., Do Not Remove Knockouts In
The Outlet Box.
11
Safety cable installation
safety cable
lag screw
safety
cable
3” lag
screw
lock
washer
washer