5
© 2017 Monte Carlo Fan Company
09/2017
13
14
15
16
17
Lift blade assembly up. Aligning the
preassembled setscrews on the flywheel
and the screw holes on the motor and
then install it onto the motor. Tighten
screws securely.
Loosen 2 and remove 1 preassembled
screw from the light pan. Save screw for
later use.
Connect white wire from fan to white wire
from light fixture, and then connect blue
wire from fan to black wire from light
fixture.
Attach LED light kit onto the light pan,
aligning the keyhole slots on the LED light
kit with the preassembled screws on the
light pan. Twist clockwise till lock.
Reinstall the screw removed in step 15.
Tighten all screws securely.
Attach glass to light pan by locating
dimples in light pan with grooves on the
glass and twist clockwise until tight.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Attach light pan onto the plate on motor,
aligning the keyhole slots on the light
plate with the preassembled screws on
the plate. Twist clockwise till lock.
Reinstall the screws which were just
removed. Tighten all screws securely.
Blue
White
Light fixture
Black
Glass
Light pan
