© 2011 Monte Carlo Fan Company
3/2/2012
3
Insert clevis pin through yoke and
downrod and secure with keeper pin.
(see inset)
Before you begin installing the fan, Switch power off
at Service panel and lock service disconnecting
means to prevent power from being switched on ac-
cidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warn-
ing device, such as a tag, to the service panel.
Install 4 x 15 watt candelabra tor-
pedo shape bulbs.
1
4
6
Loosen screw holding half ball and
remove pin from downrod. Thread
wires and safety cable through down-
rod and insert downrod into motor
yoke.
5
Before installing this fan make sure the outlet
box is properly installed to the house structure.
To reduce the risk of fire, electric shock, or per-
sonal injury, mount to outlet box or supporting
system acceptable for fan support.
(Mounting must support at least 35 lbs.)
Install the Mountiing Bracket to the
Outlet box.
Use only the screws
provided with the outlet box.
3
2
7
Tighten both yoke set screws and
lock nuts to further secure downrod.
8
Install upper glass over downrod
onto fan body.
9
Install canopy over downrod.
Cau-
tion:
Replace pin and ball onto down-
rod.
