Monte Carlo Fan Company 5TLR54 Series, Руководство пользователя и инструкция по установке

Страница: 6 / 10

6
© 2014 Monte Carlo Fan Company
3/23/2015
18 19
21 22 23
20
Set dip switches on the Remote
Transmitter and Remote Receiver to the
same settings. This must be done so the
units will communicate properly. If you
have other fans you can set to control
from one Transmitter by setting receivers
the same as the Transmitter. If you have
more than one fan with remote, you can
set the dip switches to different positions
to have separate control.
Make wiring connections using wire
connectors provided as indicated above.
White from fan to White from remote
marked N. Black from fan to Black from
remote marked L. Blue from fan to Blue
from remote marked FOR LIGHT. White
from house to White from remote marked
AC N. Black from house to Black from
remote marked AC L. Connect all green
grounded wires to Grounded wire from
House. Make sure that no filaments are
outside of the wire connectors.
Insert the remote receiver into mounting
bracket.
Install 2 of the screws to the side panel
corresponding to the open slotted holes
on the canopy upper rim, screws provid-
ed. Remove the all thread studs from the
lower part of the mounting bracket.
Lift fan to mounting bracket, aligning the
“L” shape holes with the screws on the
mounting bracket. Turn the fan clockwise
to lock in position. Install the other 2
canopy mounting set screws from the
hardware pack and tighten all screws
securely.
Install blade bracket with blade by 3 blade
screws and washers provided. Tighten
screws securely. Repeat this process for
remaining blades.
Note
: Make sure the side with a label “This
side up” is installed upward.
Remove shipping stabilizers from motor
assembly.
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
Remove the 3 set screws on top plate of
light fixture, keep screws.
Receiver
Dip switches
ON
Blade bracket
Blade
Shipping
stabilizers
Top plate
Wall
switch
Black
(Live)
Ground/Green
Whit
(Neutral)
White
White
Blue
Black
Black
This side up
This
side
up