Remove finial nut and hex nut from
the the fitter.
22
27
Attach the decorative glass piece to
the light fixture.
Attach blade to blade bracket using
the screws and washers provided.
Tighten each of the screws securely.
Repeat this process 4 more times.
19
Remove 2 cardboards pre-installed to
the fan body. Attach blade assembly
to the motor and tighten screws
securely. Repeat this process four
more times.
20
Remove 1 screw and loosen the
other 2 screws. Save screw.
21
Align keyslot holes of the light kit
plate and twist to lock. Add the
screw removed from step 21.
Tighten securely.
24
25
28
Install 3x40 watt candelabra bulbs.
Bulbs are not included.
Install the hex nut to the glass to
secure in place.
Install the decorative finial nut to
secure the glass in place.
29
Attach the glass to the light fixture.
26
Connect white wire from fan to
white wire from light fixture.
Then plug blue wire from fan to
black wire from light fixture.
23
Reverse function for this fan is a
switch on top housing of the fan
body. Turn fan off and flip switch,
this will reverse the direction of the
blades.
30
