Monte Carlo Fan Company 5SCR60BR3-L, Руководство пользователя

Страница: 6 / 10

Plug white wire from fan to white
wire from light kit. Then plug blue
wire from fan to black wire from light
kit.
46
Tighten switch housing screws.
48
Remove light rings and save.
50
Raise decorative cover and twist
clockwise until tight.
49
Install switch housing to light kit.
Install lockwasher and hex nut pro-
vided and tighten securely.
45
Plug connector from fan to connector
from switch housing.
47
Drop decorative cover ring over light
kit.
44
Install glass to fitters and then install
the light rings to hold glass in place.
51
Install 3 x 60 watt (E12) base bulbs.
Bulbs included.
WARNING: Over lamping the fan
will result in the fan lights shut-
ting down until the proper
wattage of bulbs are installed.
Reset the lights by turning off the
wall switch, breaker,or by remote.
Replace bulbs with the correct
wattage bulbs, turn the power on.
52
Raise decorative cover and twist
clockwise until tight.
43
Remove cover by snaping off from top or bot-
tom. Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready A23
/ GP 23A all 12V.Attach cover of remote by plac-
ing over buttons and snap the battery cover in
place.
53
Place face plate over battery compartment and
buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over 4
pins and snaping into place.
54 HAND HELD INSTALL