Tighten keeper nut onto threaded
pipe from the light kit.
31
Install 3 x 60 watt Candelabra base bulbs.
Bulbs Included.
WARNING: Over lamping the fan will
result in the fan lights shutting down
until the proper wattage of bulbs are
installed. Reset the lights by turning off
the wall switch, breaker, or by remote.
Replace bulbs with the correct wattage
bulbs, turn the power on.
32
Locate blue and white wire from the fan
marked “For light kit”. Connect blue from fan
to black from light and white from fan to white
from light by pushing connectors together.
33
Attach switch cap to fan by lining up
2 slot ear holes and 1 screw hole and
twisting cap. Then tighten the 3
screws.
34
Install finial cap and finial nut to
glass and tighten finial nut.
37
Install rubber washer and nut to
glass tighten nut.
36
Remove finial nut, finial cap, hex nut,
and washer from fitter.
35
