© 2013 Monte Carlo Fan Company
11/5/2013
4
Make wire connections to power source using wire nuts
provided. Make sure that no filiments are outside of
the wirenut. After making the wire connections, the
wires should be spread apart with the grounded con-
ductor and the equipment-grounding conductor on one
side of the outlet box and ungrounded conductor on the
other side of the outlet box.
11
Pass leadwires and safety cable through
the canopy.
Remove side covers from canopy exposing
4 holes. 2 closed holes and 2 open “L”
shape holes.
17
18
Lift Conopy allowing the 2 studs to
protrude through the canopy.
12
Next lift the cover ring and install knurled
nuts as shown. Tighten the knurled nuts
securely. The canopy should adjust for
any irregularity in the ceiling or Outlet
box.
13
Connect black and blue wire from fan to Black or (Hot)
wire from house. Connect White wire from Fan to White
(Neutral) wire from house. Connect Ground leads from
mounting bracket and downrod to Ground lead from
house.
Refer to Safety Tips section of manual.
10
Cover Ring
House
Fan
Blue
Black
White
Green
Black
White
Ground
“L” shape
slots
Go to Step 26
14
Install rubber pad between fan
body and canopy.
16
Remove every other screw as circled
and save for later use.
15
Flush Mount Installation
