Monte Carlo Fan Company 5HLR54 Series, Руководство пользователя и инструкция по установке

Страница: 5 / 9

5
© 2013 Monte Carlo Fan Company
11/25/2013
13 14 15
16 17
18
Install the blade assembly to motor using
the preinstalled screws. Tighten screws
securely. Repeat this process for
remaining blade assemblies.
Loosen set screws from top switch
housing. Save screws.
Attach the top switch housing onto the
plate on motor, aligning the keyhole slots
on the light fixture with the preassembled
screws on the plate. Twist clockwise till
lock. Reinstall the screw removed in step
14. Tighten all screws securely.
Connect the plug from fan and the plug
from switch housing. Make sure the plugs
are clasped securely.
Install switch housing onto top switch
housing with the set screws removed in
step 15.
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 /
Evereday A23 / GP 23A all 12V. Attach
cover of remote by placing over buttons
and snap the battery cover in place.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Blade assembly
Battery cover
Battery
Top switch housing