Monte Carlo Fan Company 5ATR56 Series, Руководство пользователя и инструкция по установке

Страница: 5 / 10

5
11 12 13
14 15 16
© 2020 Monte Carlo Fan Collections
1/2020
Lift Canopy, aligning the key holes with
the preinstalled screws on canopy and
turning clockwise till tight, and then
reinstall the set screw removed in step 3.
Install canopy ring by locating its groove
with the screws on canopy and turn
clockwise till tight.
Insert blade assembly into the slot on
flywheel.
Install it with set screws provided,
aligning each of the holes as shown and
tighten all screws securely. Repeat this
process for remaining blade assemblies.
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
Attach light pan onto the plate on motor,
Place light pan over the lead wires from
fan, aligning the keyhole slots on the light
plate with the preassembled screws on
the plate. Twist clockwise till lock.
Reinstall the screw removed in step 14.
Tighten all screws securely.
Loosen 2 and remove 1 preassembled
screw from light pan. Save screw for later
use.
Install blade bracket with blade by 2
blade set screws and washers provided.
Tighten screws securely. Repeat this
process for remaining blades.
Groove
Blade
Blade bracket
Blade assembly
Light pan