© 2013 Monte Carlo Fan Company
6/25/2013
4
Loosen the two screws and washers
on the cross on the top of the mount-
ing plate. Remove the other two
screws and lock washers and save for
later use..
11
Lift housing up aligning the L shape holes
with the screws on the mounting plate.
Turn housing clockwise to hold in position.
12
Tighten the 2 screws and lock wash-
ers removed in step 11 and tighten
the other 2 screws securely.
13
Attach blade to blade bracket using
the 3 screws and washers provided.
Tighten each of the screws securely.
Repeat this process 4 more times.
15
Attach blade assembly to the motor
and tighen the 2 screws pre-installed
to the blade bracket. Repeat 4 more
times.
16
Lift the motor bracket so that the
threaded studs on the mounting plate
protrude through the slots in the
motor bracket. Securely tighten the
locknuts onto the threaded studs.
10
Using the side of the ring with the
tongue first. Insert the plug of the
decorative ring into the hole of the
housing as shown on the picture.
14
tongue
For fan with
light kit go to
step 18.
For fan without
light kit go to
step 26.
Remove 3 screws and lock washers
from the switch cap cover and save.
17
