35
Install wall control unit to outlet box
using machine screws provided.
36
Attach front cover to wall control
with screws provided. Snap battery
cover in place.
WALL MOUNT INSTALL
33
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready
A23 / GP 23A all 12V.Attach cover of remote
by placing over buttons and snap the battery
cover in place.
34
Place face plate over battery compartment
and buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over
4 pins and snapping into place.
HAND HELD INSTALL
29
30
32
31
Install 18W CFL medium base bulb. Bulb
included.
WARNING
: USE MAXIMU 18
WATTS MEDIUM BASE LISTED SBCFL(SELF-
BALLASTED COMPACT FLUORESCENT
LAMP) ONLY, NOT USING SBCFL WILL
OVERHEAT THE UNIT AND CAUSE DAMAGE
TO THE UNIT OR THE FAN WHICH THE
UNIT IS INSTALLED TOGETHER.
Attach glass onto light pan, aligning
the holes on its top metal ring with
the screw holes on the side of ligt
pan and re-install the 4 set screws
removed in step 23.
Reverse feature of this fan is controlled
by a switch located on top of the fan
body. Turn off the fan and wait until fan
blades come to stop. Setting the reverse
switch in the left hand side will result in
downrod airflow and setting the switch in
the right hand side will result in upward
airflow.
Install scroll by aligning the set
screw and pop it onto the top ring
on the glass with the light pan.
Repeat this process for remaining
scrolls.
Reverse
switch
Содержание 4MDR52XXD Series
Страница 8: ...June 2011...
