Monte Carlo Fan Company 3VMR52XXD Series, Руководство пользователя и инструкция по установке

Страница: 5 / 9

2/8/2012 © 2011 Monte Carlo Fan Company
5
19
Lift canopy and install knurled nuts
as shown. Tighten the knurled nuts
securely. The canopy should adjust for
any irregularity in the ceiling or Outlet
box.
20
Attach blade to motor with 2 screws
provided, only start screw, do not
tighten the screws yet. Repeat for the
other blades installation then tighten all
screws securely.
21
Loosen 2 screws and remove 1
screw from the motor plate. Save
the screw for later use.
22
Connect white wire from fan to white
wire from light fixture, then connect the
blue wire from fan to the black wire from
light fixture.
23
Aline keyslot holes of the light fixture
with the screws on motor plate and twist
clockwise till tight. Install the screw
which removed in step 16. Tighten all
screws securely.
24
Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready
A23 / GP 23A all 12V.Attach cover of remote
by placing over buttons and snap the battery
cover in place.
25
Place face plate over battery compartment
and buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over
4 pins and snapping into place.
26
Install wall control unit to outlet box
using machine screws provided.
HAND HELD INSTALL
WALL MOUNT INSTALL
27
Attach front cover to wall control
with screws provided. Snap battery
cover in place.