5
© 2017 Monte Carlo Fan Company
09/2017
13
14
15
12
16
Partially loosen one and remove one
preassembled screw from mounting
bracket. Save screw.
Remove shipping stabilizers from motor
assembly.
Install blade bracket onto motor with set
screws provided.
Repeat this process for remaining blade
brackets. Tighten all set screws securely
Install a decorative cap onto motor shaft
by turning clockwise until tight.
Install blade,
aligning the holes of blade
bracket, blade and the medallion of blade
bracket (
Note
: Slip the alignment posts
on the blade bracket into the holes on the
blade by aligning the holes)
Use the provided L-shape screwdriver to
install blade bracket with blade and
medallion by blade screws provided.
Tighten screws securely. Repeat this
process for remaining blades.
Lift canopy up, aligning its keyhole slot
with the preassembled screw on
mounting bracket and twist
counterclockwise to lock in place.
Reinstall the screw removed in step 12
and tighten all screws securely.
Attach canopy bottom cap onto canopy
by aligning its notch with the screws on
mounting bracket and twist clockwise till
tight.
Mounting bracket
Decorative cap
Blade bracket
Blade
Medallion
Setscrew
L-shape
screwdriver
Alignment post
Blade bracket
shipping stabilizers
