processor controlled active speaker system
MT200A
The trademark Neutrik Combo
®
is property of Neutrik
Control and connection panel
11
ENGLISH
1
Microphone balanced input (-40dB / 2kOhms) fitted with a
Neutrik Combo
®
socket allowing use of either XLR or Jack plugs.
See 'connectors' and 'connections' at page
17
.
2
Microphone input level control.
3
Peak led indicator. The PEAK indicator is of great help to get
an idea of the output level:
- if it never blinks, this means that the system is still below its
power limits.
- occasional blinking of this LED indicates that the working condi-
tion is near to the maximum level, yet the musician's experienced
ear still continues to be the best judge of the signal quality.
4
Two independent, mixable, line balanced inputs
(-10dB / 10kOhms).
See 'connectors' and 'connections' at page
17
.
5
Level control for the Line inputs 1 and 2.
6
Equalization control. The EQ control allows to change the
response curve of the system depending on the requirements of
each different application. This enables optimizing the MT200A
for each specific requirement, whether it is used for example in a
conference hall, on stage for monitoring and many other situations.
See examples at page
11
.
7
Mixed line-level output. It can feed another MT200A, your
personal DAT recorder, a camcorder, a further mixing console....
See 'connectors' and 'connections' at page
17
.
8
Power 'on/off' switch.
9
Mains power cord socket.
Use only the factory supplied mains cable or a suitable cable with
a ground connection and marked with the safety approvals valid
in the country of use.
When installing make sure that it is easy to get to this connector
and to the mains plug.
9
1
2
3
5
6
7
4
8
