19
www.montanarigiulio.com
MGX80
ENGLISH
!
!
• The power cable must be routed separately from the other cables.
• The motor power cable is shielded and the shield must be grounded.
• The encoder cable must be routed away from the motor power cable to avoid
electrical interference.
• The brake system has a power cable and another cable for the microswitch
contacts. All electrical data are listed on the label of the brake system.
The microswitch has two contacts: one open and one closed. (Fig. 12).
These contacts indicate the brake condition (tab. 5).
PTC Thermistor clamps
[M1 - M2]
Left Microswitch clamps
[Lo and Li]
Left Brake supply clamps
[BL and BL]
Right Microswitch clamps
[Ro and Ri]
Fig. 11
Fig. 12
Right Brake supply clamps
[BR and BR]
