7.
A M6X12...4 PCS
B M6 SPRING WASHER...4 PCS
C M6 FLAT WASHER...4 PCS
B M6 SPRING WASHER...8 PCS
C M6 FLAT WASHER...8 PCS
E M6X30...8 PCS
1. Thread 2xBolts (E) through Spring Washer (B), Flat Washer (C), rear side of shelf into 1xSide Spacer Rear (16).
2. Thread 2xBolts (E) through Spring Washer (B), Flat Washer (C), front side of shelf into 1xSide Spacer Front (15).
3. Align Left Shelf Assembly (13) with Body & Lid Assembly (12) thread inserts.
4. Partially screw top rear and front bolts making sure bottom bolts stay aligned. Partially screw bottom bolts.
ATTACH RIGHT SIDE SHELF TO FIREBOX ASSEMBLY
1. Repeat for Right Side Shelf (14).
1. Align Left Shelf Assembly (13) fascia panel pre-drilled holes to Body & Lid Assembly (12) fascia panel.
2. Thread 2xBolts (A) through Spring Washer (B), Flat Washer (C).
3. Screw bolts through both fascias as shown in diagram.
4. Go back and tighten all six bolts for Left Side Shelf.
SECURE LEFT SIDE SHELF FASCIA TO BODY & LID ASSEMBLY FASCIA
1. Repeat for Right Shelf Assembly (14) fascia.
STEP 8
ATTACH LEFT SIDE SHELF TO BODY & LID ASSEMBLY
STEP 9
SECURE LEFT SIDE SHELF FASCIA TO BODY & LID ASSEMBLY FASCIA
H VIEW
J
H
G
F
I
18
17
36
28
19
23
22
20
21
8.
1. Place Heat Panel (23) over the 2xright-hand burners.
2. Cooking Grid (20) to be placed directly over the
right-hand 2xburner and 2xHeat Panel (23),
resting on inside body ledge.
3. Place Cooking Plate (22) over the 2xleft-hand burners,
resting on inside body ledge.
4. Place Cooking Pan (21) over the 2xcentre burners,
resting on inside body ledge.
5. Insert Warming Rack (19) back feet into the holes in
back body vent panel and rest the front feet on the
side body panel. As shown in diagram.
1. Hook the Battery Holder (36) onto the
Cart Left Panel (4) as shown.
2. Place Store Battery (28) inside Battery Holder (36).
3. Connect the light wire from the main barbeque
to the Store Battery as shown.
F M4X10...4 PCS
G M4 SPRING WASHER...4 PCS
H M4 FLAT WASHER...4 PCS
I
M4 MICA WASHER...4 PCS
J
M4 NUT...4 PCS
1. Thread side burner hose through hole in right-side Body & Lid Assembly (12)
and place behind side burner fascia as shown in diagram.
2. Unscrew side burner hose nut and place valve nozzle end of hose through
side burner bracket as shown in diagram.
3. Secure side burner hose in bracket with side burner hose nut.
4. Open the Right Side Shelf Assembly (14) lid and tilt the Side Burner Assembly (18)
pipe, place through base burner hole on to the valve nozzle, as shown in diagram.
5. Ensure the valve nozzle enters into the burner pipe.
6. Plug ignition wire into electrode.
7. Thread 4xBolt (F) first with Mica Washer (I).
8. Screw Bolt (F) through the Side Burner Assembly (18)
pre-drilled holes and Right Side Shelf Assembly (14)
into Flat Washer (H), then Spring Washer (G) and tighten
with Nut (J) as shown in exploded diagram.
9. Position the Side Grill (17) over Side Burner Assembly (18).
STEP 10
PLACEMENT OF SIDE BURNER ASSEMBLY AND SIDE GRILL
STEP 11
INSIDE BODY CONFIGURATION
NOTE: THIS IS A LEFT-HAND THREAD MEANING IT TIGHTENS IN AN ANTI-CLOCKWISE DIRECTION.
THE ABOVE COOKING SURFACE CONFIGURATION
IS HIGHLY RECOMMENDED. ANY ALTERATION
CAN BE POTENTIALLY DANGEROUS AND WILL
VOID YOUR WARRANTY.
PLACEMENT OF BATTERY
Содержание GRILL 6
Страница 16: ......
