MONTAGUE Salamander SB36, Инструкция по эксплуатации, Страница: 5 / 30

INSTALLATION
The gas salamander broiler is manufactured for use with the type of gas indicated on the
nameplate.
The Montague gas salamander broilers are produced with the best possible material and
workmanship. PROPER INSTALLATION IS ESSENTIAL FOR SAFE AND EFFICIENT
TROUBLE-FREE OPERATION.
THE INSTALLATION INSTRUCTIONS CONTAINED HEREIN ARE FOR THE USE OF
QUALIFIED INSTALLATION AND SERVICE PERSONNEL ONLY. INSTALLATION OR
SERVICE BY OTHER THAN QUALIFIED PERSONNEL MAY RESULT IN DAMAGE
TO THE BROILER AND/OR INJURY TO THE OPERATOR.
Qualified installation personnel are individuals, a firm, corporation or company which
either in person or through a representative are engaged in and are responsible for:
A. The installation or replacement of gas piping or the connection, installation, repair
or servicing of equipment, who is experienced in such work, familiar with all pre-
cautions required, and has complied with all requirements of state or local authori-
ties having jurisdiction. Reference National Fuel Gas Code Z223.1, latest adden-
dums.
B. The installation of electrical wiring from the electrical meter, main control box or
service outlet to the electric appliance. Qualified installation personnel must be
experience and licensed in such work, be familiar with all precautions required
and have complied with all requirements of state or local authorities having juris-
diction. Reference; National Electric Code N.F.P.A. No. 70 including all latest ad-
dendums.
CAREFULLY READ AND FOLLOW THESE INSTRUCTIONS
THE BROILER(S) MUST BE INSTALLED IN ACCORDANCE WITH ALL LOCAL
CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL FUEL
GAS CODE, ANSI Z223.1, LATEST ADDENDUM INCLUDING:
1. The appliance and its individual shutoff valve be disconnected from the gas supply
piping system during any pressure testing of that system at test pressures in ex-
cess of 1/2 psig (3.45kPa).
2. The appliance must be isolated from the gas supply piping system by closing its
individual manual and or automatic shut off valves during any pressure testing of
the gas supply piping system at pressures equal to or less than 1/2 psig (3.45 kPa).
4