Monstertech STAND, Инструкция по эксплуатации

Страница: 2 / 21

STAND INSTRUCTION MANUAL
2
1 General information
Congrats on your brand new MONSTERTECH Stand!
This guide is meant to help you assemble your Stand as smoothly as possible. If you still have
questions about the assembly process, please contact info@monstertech.de or support@
monstertechusa.com.
1.1 Before you start
Before you start the Stand assembly, we are going to look at some common assembly steps
and often used parts, as well as required tools.
1.1.1 Required Tools
For our Stand assembly, we need the following tools*:
-
Hex key set with ball head with extension
-
Rubber or plastic mallet
-
Flat head screwdriver
-
Tape measure w/ millimeters
*Tools are not included with the Sim Rig