2) Now that the four main panels are con
-
nected at the back, use the
3 x Base Plates
(9)
and place them between each
panel at the front. Align and use
4 x B Screws
per Base Plate. Use
12 x B Screws in total
for this section. See
Image 7
to check your
progress.
IMAGE 7:
3) Now connect the
Lid Panels (5, 6, & 7)
. Place the first
Lid Panel
on top of the
Right Side
Panel (1)
and the first
Centre Panel (2)
.
4) Using
4 x C Screws
, screw into place. Look at
Image 8
. The lid is attached at the back of the
storage shed. See
Image 8A
. This is where you need to place the screws. Repeat this process for
the remaining
Lid Panels.
IMAGE 8:
IMAGE 8A:
5) When attaching the doors, note that the doors
swing outwards from the
Centre Panels (2 & 3)
.
Align the
Right Door (12)
and use
6 x A Screws
to
attach. Repeat to attach the
Left Door (10) and
Centre Door 11)
, remembering to attach the
hinge from within the
Centre Panels (3 & 4)
. See
Image 4
for
reference.
NOTE: If necessary, you can attach the Wheel-
ie Bin Storage to another surface to ensure it
remains sturdy and in place. To do so, use 4 x B
Screws to attach the Wall Brackets to the struc-
ture, then use 4 x B Screws to attach to another
surface.
IMAGE 9:
