INSTALLATION
Review the installation guide that came with iCruze
®
for installation
steps required prior to Interface Cable/Module installation.
WARNING
:
IF YOU HAVE NOT ALREADY DISCONNECTED THE NEGATIVE
TERMINAL OF THE BATTERY, DO SO NOW. WE HIGHLY
RECOMMEND CONSULTING YOUR OWNERS MANUAL
FOR VEHICLE SPECIFIC INSTRUCTIONS AND PRECAUTIONS
REGARDING BATTERY CONNECTIONS.
Step 1
Get the Interface Cable from the main iCruze package. This Interface
Cable has a separate yellow wire that needs to be connected
to constant 12 volt power. This should be available from the car
stereo wire harness. Consult your car’s factory service manual
for the location of this wire. An MECP certified installation
professional can also help.
To prevent cutting the car’s wire harness, a T-Tap type connector
is recommended (be certain to use the proper size T-Tap to ensure
a reliable connection).
Step 2
Locate the wire you will use that has 12 volts constant power.
Mark this wire or put your T-Tap connector on it if you are using one,
but do not connect the yellow wire from the iCruze Interface Cable
to it yet. You will do this in Step 4.
Installation Diagram/ Location Overview
����
��
����
����
����������
�������������������
����������
������
����������������������
����������
�������
������
���������
������
����������
��
���
���
�
�
������������
