10
ENGLISH
11
ENGLISH
Functionality will vary by device. For more information on functionality for your
device, please visit http://www.monstercable.com/mp3/controltalkworks
Lighting Control
An On/Off switch for the Tron T1 Daft Punk headphones LED Light Drive is located on
the side of the ControlTalk
™
on-cable system. An AAA battery is required to power the
Light Drive System.
Connect
To connect your Tron T1 Daft Punk headphones, plug the straight 1/8-inch connector (the
end furthest from the coiled section of cable) into the port at the bottom of the earcup of
your choice and then twist it to lock it in. Both earcup sides serve as an input, so pick the side
that is most comfortable for you.
Plug the right-angle 1/8-inch connector into the audio output port on your audio gear.
Listen
Turn down the volume on your music player or gear before putting on your
Tron T1 Daft Punk
headphones.
Note the “L” and “R” markings above the inside of each earcup.
•
“L” is for the left ear.
•
“R” is for the right ear.
•
•
