monster tower Light Bar Скачать руководство пользователя страница 1

Страница: 1 / 10

MTLB-V1-051506

Page

1 of 5

Monster Tower Light Bar

Installation Instructions

and Owners Manual

NOTES ON INSTALLING AND USING YOUR NEW TOWER LIGHTS

Tower lights will reach a high temperature when operating. Do not touch or wash the

lights for 10 minutes after use.

Only use “H3 55W 12V” Halogen light bulb and fuse for replacement. These are available

at most auto parts stores. Anything exceeding 55W/15Amp could

result in damage to

your boat wiring.

Use appropriate gauge wire for all connections. Consult wiring diagrams & wire sizing
chart for details.

Use of a relay is highly recommended unless you confirm your switch can support a 20

amp load. An inline fuse is required (see wiring diagram)

Tower lights are not for wakeboarding at night, which is illegal in every state.

There are countless methods of wiring lights. Please contact a marine wiring specialist if
you need assistance. We have provided the most complete information we have found
within this document.

It is highly recommended that you use a relay and a fuse with each set of lights.

Содержание Light Bar










Результаты поиска

Содержание Light Bar

Отзывы:

Похожие инструкции для Light Bar

Бренды по названию

Популярные бренды

monster tower Light Bar, Инструкция по установке и руководство пользователя

Результаты поиска

Содержание Light Bar

Отзывы:

Похожие инструкции для Light Bar

Бренды по названию

Популярные бренды