background image

MTWTDB-V1-040105

Pg

1 of 1

Copyright 2002-2005, Monster Tower, Inc.

Double Barrel Tower Speakers

Installation Instructions

and Owners Manual

Monster Tower, Inc.

1704 Henry G. Lane Street

Maryville, TN 37801

Phone: 877-77-Tower

Fax: 877-232-6538

www.MonsterTower.com

[email protected]

THANK YOU FOR YOUR BUSINESS.  IF YOU ARE NOT COMPLETELY SATISFIED IN ANY WAY 

WITH YOUR NEW SPEAKERS, PLEASE CONTACT US.  Our entire purpose as a company is to 

offer great products at affordable prices that our customers love.

Please take a few minutes to read the installation instructions and become familiar with the 

speaker and installation before beginning to ensure a high quality, trouble free installation and 

use.  If you have any questions during your installation give us a call at 877-77-Tower or e-mail

[email protected]

NOTES ON INSTALLING AND USING YOUR NEW WAKETUNES SPEAKERS

For best performance, provide 100W-RMS at 4 Ohm to each speaker
Always remove the wires from the binding posts before removing speakers
Speakers can be easily removed by loosening the locking set screw, removing the detent 
pin and lowering the speaker
Speakers can be pointed to the rider or the front of the boat by loosening the locking set 
screw, removing the detent pin and rotating the speaker
Regularly check all hardware to make sure it is tight
Although the speakers are weather resistant and designed for outdoors use, do not spray 
directly into the grill with high-pressure water
Remove speakers for trailering to prevent bugs and road debris that need to be cleaned
Handle the speakers with care as the aluminum enclosures can be damaged if dropped

Содержание double barrel tower speakers

Страница 1: ...questions during your installation give us a call at 877 77 Tower or e mail Support MonsterTower com NOTES ON INSTALLING AND USING YOUR NEW WAKETUNES SPEAKERS For best performance provide 100W RMS at 4 Ohm to each speaker Always remove the wires from the binding posts before removing speakers Speakers can be easily removed by loosening the locking set screw removing the detent pin and lowering the...

Страница 2: ...1 2 Tower Bracket with Mounting Post 2 4 Delrin Collar Insert not shown 3 4 Tower Clamp Bolt not shown 4 4 Mounting Post Bolts 5 2 Speaker Bridge shown on page 3 6 2 Detent Pin 7 2 Locking Set Screw shown on page 3 8 1 T Handled Hex Wrench for Set Screw not shown 9 8 Binding Posts 10 4 Barrel Enclosures 11 4 Speakers actual speaker not shown ...

Страница 3: ...idge and Mounting Post The button on the end of the Detent Pin must be pressed in when inserting or removing the Detent Pin This is how the speakers are installed and removed from the tower STEP 4 Tighten the Item 7 Locking Set Screw using the Item 8 T Handle Hex Wrench This is not required for smooth water or if double up s are not routinely performed For rougher water the Locking Set Screw adds ...

Страница 4: ...them and send up damaging distortion Most amps have a Bass boost or filter that you can use to remove or add Bass Turn this off or put on the lowest setting to remove as much Bass as possible to the tower speakers If your amp has a High Pass Filter turn it to the highest frequency that sounds good to filter out as much Bass as possible The Bass uses the majority of the amplifier power with sound t...

Отзывы: