Monster Power HTS 5000, Руководство пользователя

Страница: 13 / 50

STEP 2 Outlet Programming
NOTE:
All PowerCenter outlets located on the rear panel are “programmable”. In order to program each outlet pair, you
must use the recessed slide switches (fig.2). There are two recessed slide switches for each outlet pair that enable
you to program between ”unswitched“, ”switched on“, and ”switched on after delay“ settings. You can change the
settings, when necessary. Using the outlet pair labeled as an example, the following diagrams illustrate how to
program the outlets:
7
DC OUT 9~12V 300MA
NO DELAY DELAY
OUTLET PROGRAMMING SWITCHES
DELAY TIME
SWITCH
LONG
(20 seconds) SHORT
(6 seconds)
TRIGGER OUT
SWITCH
UNSWITCHED SWITCHED DELAY NO DELAY
1
2
3
5
4
1
OUTLETS ALWAYS ON
(UNSWITCHED):
UNSWITCHED SWITCHED DELAY NO DELAY
1
OUTLETS SWITCHED ON:
UNSWITCHED SWITCHED DELAY NO DELAY
Figure 2
Figure 2a
Figure 2b
1
OUTLETS SWITCHED ON
AFTER DELAY:
UNSWITCHED SWITCHED DELAY NO DELAY
Figure 2c
Figure 2d
DELAY TIME
SWITCH
LONG
(20 seconds) SHORT
(6 seconds)
NO DELAY DELAY
TRIGGER OUT
SWITCH
Figure 2e
1