855-833-6483 OR EMAIL US AT [email protected]!
PROBLEMS? DO NOT RETURN TO STORE! CALL US AT
8
APPLYING THE DECALS - MM-E250-PR CLASSIC E-MINI BIKE
Your mini bike comes without decals applied but both pink and red decals are included
in the box. In order to apply to decals to the mini bike, you will need the following items:
- Spray bottle of window cleaner
- Rubber squeegee, body putty spreader or credit card
- Dry rag or paper towel
- Soft surface such as a towel, sheet of cardboard, or rug
Once you have secured the items above, pick your color and follow the steps below to
add the decals to the electric mini bike!
1. Place your mini bike in the proper position. For the side decals, gently place
the mini bike on its side. Use the soft surface you secured in the steps above
to avoid scratching the bike and the floor. For the front plate decal, the park the
mini bike upright on a firm, level surface.
2. Spray window cleaner on the plastic part on which the decal will be applied.
Squeeze the spray lever quickly and fully so that the spray comes out in a fine
mist. Cover the entire area.
3. Remove the applicable decal from the decal sheet and place the decal lightly on
the applicable plastic part. The window cleaner will provide a slippery surface
allowing for the decal to be moved to the final location.
4. Once the decal is placed in the proper position, slide the squeegee from the
center of the decal out to the side. To keep the decal from moving when you
move the squeegee over the decal, you may have to press down on one side
of the decal with your finger. Continue to squeeze out the window cleaner and
air bubbles from between the decal and the plastic with the squeegee, working
from the center of the decal out to all sides.
5. With a dry rag or paper towel, dry the surface of the decal and the surrounding
area making sure all of the window cleaner has been forced out from between
the decal and plastic piece on which it is applied.
6. Repeat the steps above for all decals.
MM-E250-RR RCH RACING E-MINI BIKE
If you have a RCH Racing e-mini, your e-mini comes with decals pre-applied and ad-
ditional decals in the box. Utilize the additional decals to customize your RCH Racing
e-mini to your liking! Follow the steps above to apply the decals as you see fit.
CHARGING THE E-MINI BIKE FOR THE FIRST TIME
Locate the charger that was included with your mini bike. The charger comes in a
white box in the Styrofoam packaging and is easy to miss. Do not throw away the
Styrofoam packaging until you have located the charger.
Refer to the
Basic Operation
section of this manual for instructions on how to charge
your mini bike. The first time you charge your battery it must be fully charged. While
it will be tempting to charge the e-mini for a short amount of time to be able to ride it
sooner, failure to fully charge the e-mini during its first charge cycle will severely short-
en the run time as the battery ages and will limit the number of recharges the battery
will take. Your mini bike will be ready to ride when the indicator light on the charger
turns green.
