855-833-6483 OR EMAIL US AT [email protected]!
21
LUBRICATING THE DRIVE CHAIN
The drive chain needs to be properly lubricated in order for the mini bike to oper-
ate properly. Normal use of the mini bike will cause the chain to dry and rust over
time, therefore it is necessary to lubricate the chain as part of routine mainte-
nance. Follow the steps below to lubricate the drive chain:
1. Park the mini bike on a firm, level surface and turn the engine stop switch
to the “off” position.
2. Using chain lubricating oil or any lightweight lubricating oil, apply oil to the
drive chain visible on the rear sprocket with either a spray on applicator or
an oil can. Take a rag and wipe off any excess oil with a rag.
3. Rotate the rear tire until there is a new length of the drive chain visible on
the rear sprocket. Repeat step 2 above to lubricate the new length of the
drive chain.
4. Repeat steps 2 and 3 until you are comfortable that the entire drive chain
has been lubricated.
APPEARANCE & CARE
You may clean your mini bike using water, mild neutral detergents, and/or mild
spray cleaners. Avoid using products that contain harsh detergents or chemical
solvents that can damage the mini bike’s metal, paint, and plastic. Monster Moto
recommends that you use a garden hose and a soft sponge to wash your mini
bike, as high pressure washers and harsh brushes can damage certain parts of
the mini bike. To avoid damaging the mini bike, never aim water directly at the
engine or surrounding components. Never wash the mini bike while the engine is
running. Always lubricate the drive chain after cleaning and drying the mini bike.
