13
GAS SUPPLY INFORMATION
This appliance is only suitable for use with low pressure Butane, Propane, or LPG mixtures, fitted with
the appropriate low-pressure regulator via a flexible hose. The hose should be secured to a regulator
and the appliance with hose clips. This BBQ is set to operate with a 30mbar regulator when used with
Butane and Propane gas, and 30 or 50 mbar for LPG mixtures. Please consult your local bottled gas
dealer for information regarding a suitable regulator for the gas cylinder, and BBQ.
REGULATOR AND HOSE
•
Use a regulator which is approved to EN16129 with the appropriate capacity (g/h), pressure,
working temperature and inlet/outlet connection for the country of destination. The life
expectancy of the regulator is estimated as 10 years. It is recommended that the regulator should
be changed within 10 years of the date of manufacture.
•
The use of the wrong regulator or hose is dangerous, always check that you have the correct items
before operating the BBQ.
•
The hose used must conform to the relevant standards for the country of use. The length of the
hose must be a maximum of 1.5 meters. Worn or damaged hoses must be replaced.
•
Ensure that the hose is not obstructed, kinked or in contact with any part of the BBQ other than at
its connection.
GAS CYLINDER
•
The gas cylinder should not be dropped or handled roughly. If the appliance is not in use, the
cylinder must be disconnected. Replace the protective cap on the cylinder after disconnecting the
cylinder from the appliance.
•
Cylinders must be stored outdoors in an upright position and out of the reach of children. The
cylinder must never be stored where temperatures can reach over 50
o
C. Do not store the cylinder
near flames, pilot lights or other sources of ignition.
DO NOT SMOKE NEAR THE CYLINDER(S)
.
•
This BBQ is designed for use outdoors only, away from any flammable materials. It is important
that there are
no overhead obstructions
and that there is a minimum distance of 1m from the side
and rear of the appliance. It is important that the ventilation openings of the appliance are not
obstructed. The BBQ must be used on a level, stable surface.
•
The appliance should be protected from direct draughts and should be positioned or protected
against direct penetration by any trickling water (e.g. rain).
Parts sealed by the manufacturer must not be altered by the user. No modifications should be
made to any part of this BBQ and repairs and maintenance should only be carried out by a
registered Gas Safe service engineer.
CONNECTING THE GAS BOTTLE TO THE APPLIANCE
•
Before connecting the gas supply, ensure that there is no debris caught in the head of the gas
cylinder, regulator, burner or burner parts. Spiders and insects can nest within and clog the
burner/ venturi tube at the orifice. A clogged burner can lead to a fire beneath the appliance.
•
Clean the burner holes with a heavy-duty pipe cleaner.
•
Fit the hose to the appliance, ensuring that the screw fitting has been fully tightened using a
spanner. If the hose is replaced, it must be secured to the appliance and regulator using hose clips.
•
Disconnect the regulator from the cylinder (according to the directions indicated on regulator)
when the BBQ is not in use.
•
The BBQ must be used in a well-ventilated area. Do not use indoors or in a garage.
•
ONLY USE THIS BBQ OUTDOORS.
