Monsher KVAZI 50, Руководство пользователя

Страница: 9 / 32

9
English
6.13
If the hood will operate in the recirculation mode, then the air duct is not
necessary. It is necessary to install the odor-absorbing carbon filter (optional) on
the T-shaped pin of a turbofan lid.
6.14
Install the outer panel of the chimney casing into the grooves on the hood
housing, and lift the inner one upwards to align the mounting holes with the bar
and connect the sides with 2 pan-head screws 2.9x9.5 (Fig. 4).
6.15
Ensure that the cooker hood is properly fastened. Supply and connect a power
cord to the mains power supply using a socket. To provide additional protection in
case of power supply voltage swings, connect the appliance using an additional 6А
circuit breaker.
7. INSTRUCTIONS FOR USE OF THE COOKER HOOD
7.1
The cooker hood with the mechanical switch has 3 fan speeds. You can select
low, medium or high-speed mode considering cooking evaporation output.
7.2 Switch the cooker hood on and select an appropriate operation mode prior
to cooking.
Allow it to operate for 3-5 min after cooking in order to exhaust residual evaporation
and odors.
7.3 On the bottom surface of the housing there is a button switch for selecting
of operating mode and switching on the light bulbs (Fig. 5):
Fig. 5
1 - low speed,
2 - medium speed,
3 - high speed,
0 - the fan is off.
The switch (with the symbol of a light bulb) is designed
to turn on the light bulbs in case of insufficiently
illuminated cooktop:
0 - light is off.
І - light is on.