24
3) Tighten the 2 bolts 4.8x50 YSB into the
plugs in the wall at points A and B. Make sure
there is a distance of 5mm between the bolt
head and the wall.
4) Attach the chimney inner spigot strip to
the Ø6mm wall plugs at points E and F using
3.9x22 RYSB bolts.
5) Hang the hood by screwing it at points A
and B, keeping a clearance of 5 mm between
the bolt head and the wall.
6) Open the protective glass of the hood
by pulling it towards you and remove the
aluminum cartridge filter. Fasten the product
by tightening the 4.8x50 YSB bolts in the
plastic plugs on the wall in holes C and D
visible from the inside of the product.
7) Connect the hood to an aluminum
exhaust pipe (not included). slide the flexible
aluminum tube onto the plastic duct adapter
and secure it using a plastic or metal tie
without overtightening. Insert the other end
of the pipes into the duct hole on the wall.
