7
2.
SELECT: Press the SELECT button to select the video input.
3.
V.+: If the OSD menu is not displayed, press the V.+ button to increase the volume
level. If the OSD menu is being displayed, press the V.+ button to move the
highlight to the right.
4.
V.-: If the OSD menu is not displayed, press the V.- button to decrease the volume
level. If the OSD menu is being displayed, press the V.- button to move the highlight
to the left.
5.
▲
: If the OSD menu is not displayed, press the
▲
button to adjust the aspect ratio.
If the OSD menu is displayed, press the
▲
button to move the highlight up.
6.
▼
: If the OSD menu is not displayed, press the
▼
button to cycle through the
crosshair modes. If the OSD menu is displayed, press the
▼
button to move the
highlight down.
7.
: Press the button to turn the monitor on or to put it in standby mode.
Remote Control
Turns the monitor on or puts it into standby mode.
Selects the video input.
Turns audio muting on or off.
Selects the image aspect ratio.
Up selects the channel.
Down selects the channel. Quick enter for target crosshairs.
Decreases the volume level.
