Monoprice Soundstage 3, Руководство пользователя

Страница: 11 / 16

11
each speaker and a tone sequence will play while
the two systems search for each other.
3. Once the two systems are linked the TWS LEDs will
cease flashing and will illuminate steadily. You will
also hear a confirmation tone from both speakers.
If the connection is lost between the two speakers or
between the Master speaker and the source device, and
they do not reconnect automatically, power cycle both
speakers and allow them to reconnect.
Note that the PAIR button on the Slave speaker will be
disabled. If you press the PAIR button on the Slave
speaker, you will hear three rapid beeps, indicating that
the system cannot be paired.
Clearing Memory
To erase all previous pairings and linking settings, press
and hold either the PAIR or the TWS button for 3 seconds.
You will hear a long tone to confirm that the pairing and
linking settings have been erased. The LEDs will also turn
off. You can now establish a new pairing or link the
speakers again.