background image

14 

4.

 

After the connection is established, the Paired LED will cease blinking and illuminate 
solid. 

5.

 

If the Paired LED starts blinking slowly, the wireless connection has failed. Unplug 
the subwoofer, wait for 3 minutes, then plug it back in and repeat steps 1-4. 

Notes: 

 

If the wireless connection fails again, check to see if there is a conflict or strong 
interference from other electronic devices. Remove the conflicts or source of 
interference, then repeat the pairing procedure. 

 

The subwoofer should be located in an open area within 19 feet (6 meters) of the 
soundbar. 

 

If the soundbar is powered on and is not connected with the subwoofer, the 
POWER indicator on the soundbar will flash. Repeat the above steps to establish a 
wireless connection. 

 

OPERATION 

Power 

 

When you first plug the soundbar into an AC power outlet, it is in Standby Mode. 

 

Press the Power button on the soundbar top panel or IR remote control to power 
the soundbar on. 

 

Press the Power button again to put the soundbar back into Standby Mode. 

 

If using the HDMI® ARC input, turning your TV on will turn the soundbar on at the 
same time. 

 

After about 15 minutes with no input, the soundbar will automatically switch to 
Standby Mode. 

 

Unplug the soundbar from the AC power outlet to turn the soundbar completely 
off. 

 

 

Содержание SB-200SW





















Отзывы: