CONTROLS AND CONNECTIONS
Front Panel
Stereo/Bridge:
Selects stereo or mono bridged operation. In bridged mode, the
amplifier provides one 40W RMS output channel, capable of driving an 8-ohm
load.
Source:
Pressing this button toggles between LINE1, LINE2, and BLUETOOTH
sources, as indicated by the LED indicators directly above the button.
Select:
Press this knob to select VOLUME, BASS, TREBLE, or BALANCE. The LEDs
above the knob indicate the current selection. Turn the knob to adjust the level of
the selected function.
Bluetooth:
Press this button to perform Bluetooth functions. See the Bluetooth section
below for details.
Power:
Pressing this button toggles the unit ON and OFF.
Rear Panel
RS-232:
For connection of an external serial control device, such as a PC
Antenna:
For connection of the included Bluetooth antenna. NOTE: Use extreme care
in handling this delicate antenna.
DIP Switches:
Loudness:
Boosts high and low frequency signals at low volume levels. The
effect of this diminished as the volume setting is increased. Once the
volume reaches 70% of maximum, this control has no effect.
Limiter:
Automatically reduces input sensitivity as the amplifier approaches its
maximum output level. This prevents distortion and clipping when the amp
is used near full output. Because this does tend to reduce the overall
dynamic range, it is recommended that this not be used in high fidelity
applications.
Note: After changing the DIP switches, the amp must be temporarily unplugged
from its power source for the changes to take effect.
Line 1:
Stereo 3.5mm TRS jack for connecting the headphone output of mobile devices.
Содержание PID 11498
Страница 1: ......