4
.
Apply grease to the entire waterproof seal then attach the seal
*
Before the first use and after
each
successive use, p
ut about a droplet of grease
on
your index finger, hold the seal between your index
finger and thumb, and
slide your fingers, around the seal so the grease is applied evenly.
*
Do not to damage the seal when applying the grease.
*
Do not forcibly pull the seal when putting it in the mounting groove.
5
.
Close the waterproof case
Seat the camera securely inside the case before closing it.
6
.
Hold the waterproof case in water
Submerge the waterproof case slowly in a tub filled with
water
and make sure there are no leaks
.
7
.
Wipe the exterior of the waterproof case with a soft,
dry cloth
When using commercially available anticondensation products, the anticondensation
solution should be applied only to the inside surface of the lens window using a soft, dry
cloth
.
If the solution comes in contact with any other surface, wipe it off immediately as it
could lead to deterioration of the waterproof case
.
i
NOTES
1
0