background image

SAFETY WARNINGS AND GUIDELINES 

Please read this entire manual before using this device, paying extra attention to these 
safety warnings and guidelines. Please keep this manual in a safe place for future 
reference. 

 

This device is intended for indoor use only. 

 

Do not use this device in a wet or moist environment, such as a bathroom or 
laundry. 

 

Do not touch the device, the power cord, or any other connected cables with 
wet hands. 

 

Do not expose this device to excessively high temperatures. Do not place it in, 
on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it 
in direct sunlight. 

 

Do not use this vacuum in proximity to curtains, cords, loose cables, fragile 
objects, papers, loose debris, or anything that could get easily knocked over. 

 

Do not use this vacuum around cigarette ends, lighters, matches, volatile liquids 
such as gasoline, or any other flammable materials. 

 

If the vacuum needs to be cleaned, it should be fully charged beforehand. 

 

Do not sit on the vacuum or allow pets or children to sit on it. Take care when 
using this around children or pets. 

 

Do not use this product where it can easily fall, such as on tables, chairs, or next 
to stairs. 

 

Turn off the vacuum when transporting it or when it will not be used for a long 
time. 

 

Empty and clean the dust bin and filters after each use. 

 

Remove the batteries from the remote if it will be unused for a long time. 

 

Fully charge the battery before first use and at least once every three months. 

 

This device contains a rechargeable battery. Dispose of the device or battery 
only in accordance with local, state, or federal regulations for electronic waste. 

 

Do not allow small children to use or play with this vacuum. 

 

Содержание MP Strata Vacuum 2.0
































Отзывы: